STAGES 1-10

This is just a page to group the stages by ten each. Please use the menus above or the direct links below:

  • Stage 1 – Hood, Hood Rims, Front License Plate, Ghostbuster Sticker, Air Inlets
  • Stage 2 – Front Grille/Strips, Strobe Lights, Headlights/Housings/Lenses
  • Stage 3 – Front Bumper, Fog Light Casings/Frames/Lenses
  • Stage 4 – Left Front Tire, Hub Cap, Center Cap, Inner/Outer Wheel
  • Stage 5 – Bell Housing, Bell Housing Connector/Plate, Gearbox Housings/Connector, Oil Pan
  • Stage 6 – Left Engine Block/Cylinder Head/Cover/Support, Dipstick, Left Exhaust Manifold, Ignition Wire Junction
  • Stage 7 – Timing Belt Cover, Water Pump, Oil Sump, Engine Top/Cover, Distributor, Intake Manifold, Right Engine Block/Exhaust Manifold
  • Stage 8 – Right Cylinder Head/Valve Cover, Ignition Wire Junction/Coil/Spark Plugs, Fuel Pump/Filter, Dipstick, Starter
  • Stage 9 – Idle Cam, Fuel Inlet/Hose, Choke Cap, Carburetor, Air Filter, Air Filter Side/Inlet/Cover/Screw, Fuel Pipe
  • Stage 10 – Generator, Generator Supports/Connectors/Pulley, Water Pump Housing, Oil Filter

Building the 1:8 scale Ghostbusters Ecto-1 from Eaglemoss