Return to the BUILD

“In this stage, you fit the lower skirt to the left rear fender.”

The steps in this stage will be similar to those we did on the other side of the car in Issue 106.

Contents

Parts

Materials: The two parts in this stage are metal.

Build

Left Rear Fender & Skirting

Step 01

Fit the two posts of the Left Rear Fender Skirt into the matching holes of the Left Rear Fender, as shown:

Secure the Left Rear Fender Skirt into place from behind with two (2) BM screws.

This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:

Thoughts

We have done this before, but it is cool to see the large round ports that the blue side tubes will eventually connect to!

Next Up

Stage 111 – Left Rear Fender Crown/Trim, Left Rear Outer Light Housing